Wet Type Gas Flow Meter

We provide Wet Type Laboratory Gas Flow Meter. The gas flow meter (wet type) consists of a measuring drum made of stainless steel fitted with a spindle enclosed in a  cylindrical, gas tight casing of stainless steel. The measuring drum rotates on a horizontal axis. The instrument is filled with sealing liquid (generally distilled water) up to marked level. The measuring drum is divided into four compartments, and the gas gets filled and discharged as the drum rotates.

The gas inlet and outlet connections are made of gas filled nylon and are provided on the back of the meter. A drain plug is provided to drain the liquid. On the right hand side of the meter a water level indicator block is fitted in which an armored thermometer is inserted to indicate the temperature of the gas. Three leveling screws and a spirit level are provided for leveling the meter. The meter is provided with a handle for easy movement. A needle that rotates along with the drum indicates instantaneous flow volume on a dial marked in liters. A mechanized counter is provided for recording number of revolutions, thereby giving cumulative volume of gas flow.

Accuracy:
The accuracy of the meter depends upon the number of revolutions of the drum per minute. The accuracy of measurement is +/- 0.5% when the flow rate of gas is within that specified. Accuracies are for full revolutions only. Accuracy for part revolutions available as options.

Calibration:
Each meter is calibrated at factory. The requisite liquid level required for the meter to measure flow volume as per its capacity per revolution is duly marked on the water level indicator block. Recalibration if required may be done at user site. Requisite guidelines for calibration can be provided on request. Meters calibrated for part revolutions can be supplied against special orders.

Application:
For highly accurate measuring of low volumes of gas flow at low pressures and low flow rate. Can be used for all gases except those which are highly corrosive.Predominantly used in Petroleum & Petro chemical Industries, Fertilizer plants, Gas producing & gas consuming industries, calibration of LPG & Bio Gas Stoves, Bio Gas plants, Coke processing batteries, Research labs, Plastic industries etc.

Available Models
Model No. ISI- 08B

• Capacity:  1 Liter / Revolution

• Minimum Flow Rate: 1 Liter / Hour

• Maximum Flow Rate: 270Liters / Hour

Model No: ISI- 06B

• Capacity:  3 Liters / Revolution
• Minimum Flow Rate: 9 Liters / Hour
• Maximum Flow Rate: 810 Liters / Hour

Model No: ISI- 04A

• Capacity:  10 Liters / Revolution
• Minimum Flow Rate: 100 Liters / Hour
• Maximum Flow Rate: 2700 Liters / Hour

Conforms to requirements under ASTM D 892, ASTM D 1071…. 

Used for highly accurate (± 0.5%) measurement of volume of gas flow at low pressure (2” to 12”  W.G) at low flow rates (upto 27000 ltrs / hr) 

User categories include chemical, fertilizer & petrochemical plants; lube & petroleum refineries; bio-gas producers; steel plants; gas stove manufacturers…

 

Available Models:

ISI- 08B

• Capacity per Revolution: 1 Liter
• Minimum Flow Rate: 1 Liter / Hour
• Maximum Flow Rate: 270Liters / Hour

ISI-06B

• Capacity per Revolution: 3 Liters
• Minimum Flow Rate: 9 Liters / Hour
• Maximum Flow Rate: 810 Liters / Hour

ISI- 04A

• Capacity per Revolution: 10 Liters
• Minimum Flow Rate: 100 Liters / Hour
• Maximum Flow Rate: 2700 Liters / Hour

For more detailsplease contact us with your requirement.

 

 

• Item Code: ISI-04A
• Delivery Time: 4-5 weeks

Conforms to requirements under ASTM D 892, ASTM D 1071…. 

Used for highly accurate (± 0.5%) measurement of volume of gas flow at low pressure (2” to 12”  W.G) at low flow rates (upto 27000 ltrs / hr) 

User categories include chemical, fertilizer & petrochemical plants; lube & petroleum refineries; bio-gas producers; steel plants; gas stove manufacturers…

 

Available Models:

ISI- 08B

• Capacity per Revolution: 1 Liter
• Minimum Flow Rate: 1 Liter / Hour
• Maximum Flow Rate: 270Liters / Hour

ISI-06B

• Capacity per Revolution: 3 Liters
• Minimum Flow Rate: 9 Liters / Hour
• Maximum Flow Rate: 810 Liters / Hour

ISI- 04A

• Capacity per Revolution: 10 Liters
• Minimum Flow Rate: 100 Liters / Hour
• Maximum Flow Rate: 2700 Liters / Hour

For more detailsplease contact us with your requirement.

Conforms to requirements under ASTM D 892, ASTM D 1071…. 

Used for highly accurate (± 0.5%) measurement of volume of gas flow at low pressure (2” to 12”  W.G) at low flow rates (upto 27000 ltrs / hr) 

User categories include chemical, fertilizer & petrochemical plants; lube & petroleum refineries; bio-gas producers; steel plants; gas stove manufacturers…

 

Available Models:

ISI- 08B

• Capacity per Revolution: 1 Liter
• Minimum Flow Rate: 1 Liter / Hour
• Maximum Flow Rate: 270Liters / Hour

ISI-06B

• Capacity per Revolution: 3 Liters
• Minimum Flow Rate: 9 Liters / Hour
• Maximum Flow Rate: 810 Liters / Hour

ISI- 04A

• Capacity per Revolution: 10 Liters
• Minimum Flow Rate: 100 Liters / Hour
• Maximum Flow Rate: 2700 Liters / Hour

For more detailsplease contact us with your requirement.